Our Switch box (ordered separately) and the magnetic sensors allow you invisible LEDs in cabinets or the like, on and off. It can be easily connected by means of hollow plug-distributor more sensors.
You will receive a magnetic sensor with 3m cable and a permanent magnet. The sensor is through a 6mm hole in the closet, which (not break through side door opening) from behind to front. The permanent magnet can accommodate you by slot on the top or bottom of the door. The distance from the sensor to magnet must max. be 1cm.
Technical details: Door Sensor Magnet
Operating voltage: 12-24V DC
Dimensions Sensor: 6mmx3000mm
Dimensions Magnet: 15x2mm
Degree of protection: IP20
