For operation you need a 12V DC power supply. The strips are dimmable with our 12V controls.
Protected against splashing water by transparent epoxy layer (caution can turn yellow due to heat and sunlight). For quick and easy installation, heat-resistant 3M adhesive tape. Connections for soldering at the interfaces. Divisible every ~25mm with scissors. Always mount the strip on an aluminum profile or the like for cooling and for the sake of durability. Please note the installation instructions.
We would be happy to assemble the LED strips in the appropriate length and with cables and plugs.
Technical details: BASIC LED Strip Red 12V DC 9,6W/m IP54
Operating voltage: 12V DC
Power input: 9,6W/m
Luminous flux: ~252lm/m
Efficiency: 26lm/W
Energy label class until 08.2021: B
Energy label class from 09.2021: G
Light color: red 620-630nm
Number of LEDs: 120/m
LED type: Epistar 3528 SMD
Beam angle: 120°
Cutting length: ~25mm
Length max. per feed: 5000mm
Dimensions WxH: 8x3mm
Degree of protection: IP54
Unfortunately there are no review yet. Be the first who rate this product.