For operation you need a 12V DC power supply. The strips are dimmable with our 12V controls.
Protected against splashing water by transparent epoxy layer (caution can turn yellow due to heat and sunlight). For quick and easy installation, heat-resistant 3M adhesive tape. Connections for soldering at the interfaces. Divisible every ~ 50mm with scissors. Please note the assembly instructions.
We would be happy to assemble the LED strips in the appropriate length and with cables and plugs.
Technical details:
Operating voltage: 12V DC
Power consumption: 4.8W / m
Luminous flux: ~ 342lm / m
Efficiency: 71lm / W
Energy label class: A
Light color: warm white ~ 2700K / Effektiv 3000K
CRI:> 80Ra
Number of LEDs: 60 / m
LED type: Epistar 3528 SMD
Beam angle: 120 °
Color consistency: 3 SDCM
Cutting length: ~ 50mm
Length max. per feed: 5000mm
Dimensions WxH: 8x3mm
Degree of protection: IP54
Spillproof by transparent epoxy (Attention may yellow by heat and sunlight). For fast simple assembly, back with heat resistant 3M tape. Connections for soldering on all interfaces. Shareable all 5cm with shears. Please refer to the assembly instructions.
Gladly we manufacture the LED strip with a matching cable and plug.
Technical details:
Type / LED spacing: 16,6mm
Operating voltage: 12V DC
Power Consumption: 4.8W/m
Luminous flux: about 270lm/m
Number of LED: 60/m
LED Type: 3528 SMD
LED color: warm white 2600-2900K
Viewing Angle: 120 °
Cutting length: 5cm
LED per cutting length: 3
Max. Length: 500cm
Degree of protection: IP54
Dimensions WxH: 8mm x 3mm